2.4G 3x6A RF Wireless Touch Remote Control WIFI RGB LED Controller

I. User Instruction
Welcome to use Touch Screen RGB LED control system,please read the instruction carefully before using.

I .Product Description
This system is a high‐performance RGB LED touch remote controller, adopting the most advanced PWM control technology, controlling all RGB LED products with Four lines and three circuits( common anode),owning 640 thousand colors and 20 automatical changing modes to choose. Also, It has the memory function(that is to say, the previous settings will be resumed when power on again). It is widely used in LED RGB strip light, LED module and so on. With the technology of the 2.4G high frequency wireless remote control, it has the the characteristics of low power consumption, long distance transmission, and strong anti‐interference ability ,high speed telecommunications, etc. The remote looks fashionable and elegant , with simple and practical functions of color changing and brightness dimming, the capacitive touch screen design makes the remote easy to use . The modular design and easy screwed terminals enable the controller easy to match with all kinds of LED light products.

II. Technical Date

Remote	Size	110×52×20mm
	Power	AAA×2
	Material	ABS
	Fabrication processing	Multicolor printing & UV varnish
controller	size	85×45×23mm
	Working voltage	12V～24V
	Control way	R G B  three channels
	Max load per channel	6A
	Output Connection	Common anode
	Telecontrol distance	20~30 meters
	Programs	20 kinds

 

Connection:

 Attention

1.Please check whether the input voltage of the constant voltage power supply is in accordance with the controller, and please check the connection of both the cathode and anode, otherwise the controller will be broken.

2.lease don’t connect wires with power on.

Please switch on again only when it is in right connection and no short circuit.

3.Please keep your figure off the touch ring when installing the batteries, to improve its sensitivity,and use the remote ( 3 seconds later) after the batteries are instalLED.

Please reinstall the batteries, if the touch ring is found low-sensitivity.

4.Please do not use the controller in the place with widely range metal area or with strong electromagnetic wave nearby, otherwise, it will seriously affect the remote distance.